• Press and hold down the button "prog"
• Enter in the desired start time with the buttons "h"
j
u
and "min"
(see chapter "Setting the
timer").
• When the desired time has been entered,
release the button "prog"
• Enter in the desired coffee strength by turning the
o
aroma knob
.
• Press the button "auto"
indicator
s
lights up.
• If you wish to deactivate the automatic brewing
start, press the button "off"
Cleaning and care
• Always remove the plug from the power socket
before cleaning the appliance.
Danger of electrical shock
Before you clean the Coffee Maker, you must
remove the power plug from the power socket.
Caution
When cleaning the Coffee Maker, under no
circumstances may you submerse it in water or
hold it under running water.
Risk of burns!
Always wait until the Coffee Maker has cooled
down before cleaning it.
Take off the lid of the thermos jug
cleaning (see Fig
)
• Do not use household detergents or sharp/
pointed objects to remove soiling. These could
damage the Coffee Maker.
• Wipe the housing of the Coffee Maker and the
thermos jug
r
with a soft cloth lightly moistened
with a soapy solution.
• After every brewing process remove the filter
bag from the filter insert
h
.
h
. The Timer is set.
i
until the green
d
.
r
, when
y
.
• Remove the filter and rinse the filter holder
y
the filter insert
running water.
Cleaning of the lid
• To clean the lid of the thermos jug r first
disassemble the lid (See Fig.
• Carefully pull off the silicone disc from the valve
at the underside of the lid. When doing this, hold
the valve, because it is pressed up by a spring
from the other side.
• You now can take off the valve and the spring.
• Clean all parts with a mild soapy solution and
wipe them off well.
• To assemble the lid again, proceed in reversed
order.
Note:
Do not let the thermos jug with lid lie in soapy water
and do not wash the parts in the dishwasher, as
they could become leaky!
If you do not use the Coffee Maker for an extended
period, store the power cable in the cable storage
t
compartment
(Fig.
Removing scale
Remove scale from the Coffee Maker regularly.
If your water has a high degree of hardness, the
coffee maker must be descaled after every 30 ap-
plications, low degrees of hardness need only be
descaled after every 60 applications.
Use only descaling agents that are suitable for cof-
fee machines and read up the instructions.
• Insert the descaling agent into the water tank
• Fill it with enough water for max. 8 large cups.
• Turn the aroma knob
descaling function.
• Press the button "on"
turns on and the indicator "calc"
• Wait until the solution has completely run
through the Coffee Maker.
- 21 -
r
and the thermos jug
):
).
o
to "calc" to activate the
f
. The red indicator
g
is blinking.
q
,
under
w
.
a