Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL
VHILS
REF. A15060403A|A15060414A|A15060420A|A15060429A|A15060509A
A15061203A|A15061214A|A15061220A|A15061229A|A15060709A
A15060703A|A15060714A|A15060720A|A15060729A|A15061209A
A15060501A|A15060503A|A15060514A|A15060520A|A15060529A
GENERAL SAFETY INFORMATION
_____________________________________________________________________________
>
To reduce the risk of death, personal injury, fire, electric shock,
falling parts, cuts / burns and other hazards, read all warnings and
instructions included with the appliance box as well as all labels.
>
Before installing or maintaining this equipment, follow the
instructions in this manual. For a residential installation, if you
are unsure whether to install or maintain the luminaire, consult a
licensed and qualified technician.
>
DO NOT INSTALL THE PRODUCT IF THE SAME IS DAMAGED
>
To prevent injury or damage to the assembly of this product,
make sure the conductors and screws are secure before connecting
the power.
>
Young children should be supervised to ensure that they do not
play with this product.
>
Handle the installation carefully to avoid any damage or breakage.
>
For installation, select an appropriate location away from liquids
and hazards. Make sure that the connection does not come into
contact with corrosive materials or surfaces, chemicals, etc.
>
Turn off the power and let it cool before cleaning. To clean, use a
clean, damp cloth. Never immerse the appliance in water.
>
Check that the supply voltage is correct compared to the
informative label of the luminaire.
INSTALLATION INSTRUCTIONS
_____________________________________________________________________________
Make sure the power supply is turned off.
1. Set the fixation support on the ceiling.
2. 3. Connect the wires of the fixed wiring respecting the
instructions given: connect the live conductor to terminal L (brown
color), the neutral conductor (blue color) to the N terminal and the
phase conductor (green/yellow) to the ground terminal.
Avoid electric shock.
3. Fix the luminaire on the fixation support with the lateral screws.
Be sure the screws are tighten well.
4. Reconnect the power supply.
IMPORTANT
_____________________________________________________________________________
Ensure that:
1. The screws are tight.
2. Connections are correct. If in doubt, consult a qualified technician.
3. The connector is well placed. In case of doubt, consult a qualified
technician.
4. The light source and independent control device can be removed
by qualified person without permanent damage to the whole lamp.
5. This product contains one light source of energy efficiency
class E.
[ EN ]
2
Publicidad
