Publicidad
Idiomas disponibles
Idiomas disponibles
Step 9
First, make sure to lock the wheels to leave the base on its place.
Carefully place the main body (1) on the lower structure.
J H E
Step 11
Assemble the handle (21) in the front door using M8*16 screws
(E), M8 spring washers (H) and D8 washers (J). Slide the water
drain (23) under the drain hole.
8
1
Step 10
Assemble them together using four M6*60mm hexagon screws (D)
and M6 nut (K). Place the grill sideways over the base first. This
will help it from its top part, also preventing hand injury. Then grab
it from the top, and place on the structure.
24
23
Step 12
Place the firebricks (24) into the body. The firebrick with chipped
corner goes first around the square tube. We recommend to even
out the space between the firebricks before the first use with a
knife or screwdriver.
D
K
Publicidad
