Sears KENMORE ELITE 125.81714610 Manual De Uso Y Cuidado página 13

1. Press wand release
button and pull up on
handle.
--i—Wand
Release
2. Slide attachments
firmly on handle as
needed. See
ATTACHMENT USE
TABLE (page M).
NOTE:
To remove Pet PowerMate, dusting brush,
and/or floor brush, press the wand release
button and slide attachment out.
1. To remove wand from
PowerMate, lock wand
in straight-up position.
2. Press wand release pedal with foot and
pull the wand straight up and out of
PowerMate.
ATTACHMENTS
A
CAUTION
DO NOT attach or remove handle or
wands while vacuum cleaner is ON. This
could cause sparking and damage the
electrical contacts or electronic controls.
ATTACHMENTS ON HANDLE
NOTE: If the PowerMate ® is attached, turn
vacuum cleaner off before removing handle
from wand.
ATTACHMENTS ON WAND
3. Put attachments on wand as needed. All
except crevice tool will click into place.
See ATTACHMENT USE TABLE (page 15).
NOTE:
To remove Pet PowerMate®, Dusting Brush,
and/or Fan Tool, press the tool release
button and slide attachment out.
- 13 -