Publicidad
Hardware Usage Guide
HOW TO USE A TWIST-LOCK
1.
Push a TWIST-LOCK® FASTENER
into the large hole in the part.
Step 3
å
Push four SAUDER TWIST-LOCK® FASTENERS (37F) into the
large holes in the RIGHT END (A2) and UPRIGHT (P).
å
Insert two WOOD DOWELS (15F) into the RIGHT END (A2).
Do not tighten the TWIST-LOCK®
FASTENERS in this step.
37F
Page 8
FASTENER
®
P
427018
2.
1. Insert the dowel end of the FASTENER into the
hole of the adjoining part.
NOTE: The dowel end of the FASTENER must
remain fully inserted in the hole of the adjoining
part while locking the FASTENER.
2. Tighten the FASTENER with a Phillips
screwdriver as tight as possible.
15F
A2
Meet Part (A2). This component has
been engineered to be lighter, stronger,
faster... well ok. Not technically faster.
But definitely makes for a sturdier
Credenza that' s easier to assemble
and friendlier to the environment.
Dowel end
2
www.sauder.com/service
Publicidad
