Sauder Portage Park Serie Instrucciones De Montaje página 8

Step 2
å
Separate the EXTENSION SLIDES (2) from the EXTENSION RAILS (1) as shown in the upper diagram
below. Be prepared, the parts are greasy.
å
Fasten the EXTENSION RAILS (1) to the ENDS (H and J). Use twelve 1/2" FLAT HEAD SCREWS (19)
through the exact holes shown.
å
NOTE: For each EXTENSION RAIL, turn a SCREW into the 1
Then, slide the inner cartridge of the EXTENSION RAIL in to find the other holes that line up with the
holes in the END. Turn a SCREW into each hole.
å
NOTE: The EXTENSION SLIDES will be used later for the DRAWERS.
1
Open end
Page 8
1/2" FLAT HEAD SCREW
(12 used in this step)
1
st
Slide the black lever in and pull the SLIDE from the RAIL.
1
st
1
H
1
www.sauder.com/service
hole shown in the enlarged diagram.
st
19
1
1
st
J
1
1
st
7
2
Open end
1
st
427478