Publicidad
Idiomas disponibles
Idiomas disponibles
SCALE CALIBRATION
In weigh mode, press both the Dial and the Timer Button for
approximately 3 seconds.
IMPORTANT: Ensure you are only using a 50 gram ASTM Class 1
calibration weight for scale calibration in order to guarantee accuracy.
1. Follow instructions on the screen to complete scale calibration.
2. When the screen prompts: "Begin calibration?", select the desired
response by turning the dial clockwise/counterclockwise and then
press the Dial or the Timer Button to confirm the selection.
3. When the screen prompts: "Place 50 g Weight", place 50 gram
weight on the center of the scale weigh pan.
4. The screen will display an animation while the scale is going
through calibration.
5. Once calibration is complete, the screen will return you to your
previous mode.
FACTORY RESET
1. In Brew Assist Mode, with the coffee-to-water ratio displayed,
turn the dial counterclockwise until the ratio becomes 1:1.
Next, keep turning the dial until the ratio changes to "rst".
2. Press the Timer Button and the display will then show: Factory
Reset? (Yes/No)
3. Select the desired response by turning the dial clockwise/
counterclockwise.
4. Press the Dial or the Timer Button to confirm the selection.
• "No" returns to Brew Assist Mode.
• "Yes" will display the following: "Resetting Device".
5. Wait 3 seconds once displayed, the device will reset itself.
10
SERVICE
For service, repair, or any questions regarding your appliance, please
visit bit.ly/getfellowsupport to submit a request. If you still have
questions, reach out to us at help.fellowproducts.com.
Do NOT mail the product back to the manufacturer or bring it to
a service center without first talking to a Fellow customer service
representative.
TWO-YEAR STANDARD WARRANTY
Fellow warrants this product against any defects that are due
to faulty material or workmanship for a two-year period after the
original date of consumer purchase.
This warranty is valid only for:
• The original consumer.
• Scales purchased through authorized retailers.
• Scales with the original sales receipt for proof of purchase.
This warranty does not include damage to the product resulting from:
• Accident, misuse, or repairs performed by unauthorized personnel.
• Operation with the wrong type of current or voltage.
• Failure to follow cleaning instructions for the scale.
• Failure to comply with any safeguards listed in the warnings and
instructions of this document.
If the product should become defective within the warranty period,
or you have questions regarding warranty or service, visit us at
help.fellowproducts.com to submit a request.
More info at Fellowproducts.com/pages/gear-guides
11
Publicidad
