MAYWAY MW-801 Manual De Instrucciones página 5

replacing on furniture.
NOTE: it is recommended that you use the fabric brush attachment when steaming delicate fabrics such as silk, this will
minimise the garment whilst steaming. for better result when removing stubborn creases, remove the fabric brush
attachment from the steam head and continuously steam over the selected area until creases are removed.
WARNING: if garment has metal accessories, be cautious and do not have garment steamer directly over the metal as this
may discolour the metal.
WARNING: always unplug the garment steamer before attaching or detaching the fabric brush.
NOTE: only use attachments or accessories provided.
NOTE: if the unit becomes noisy with a loud humming sound and no steam is being generated, check the water level in the
water tank. this may indicate that the garment steamer is out of water and needs to be refilled.
WARNING: do not use the garment steamer directly on the body, animals, or while wearing the garments.
After each use
press the power button , switch the power off at the power outlet and disconnect the power cord from the power outlet.

Open the water tank inlet and (over a sink or bucket) invert the water tank to empty the remaining water from the tank.

Stand the garment steamer on its base, in an upright position, and allow to cool.

Care, cleaning and storage
Care and cleaning
Remove the fabric brush from its steam head and clean using a damp cloth.

Do not use harsh or abrasive cleaning agents or solvents.

Do not put the garment steamer in water or any other liquid.

Do not drop, throw or try and bend the steamer.

Do not attempt to disassemble the appliance.

The garment steamer is designed for household use only and to be used with normal tap water. do not put perfume,

vinegar, or other chemicals in the tank. the appliance is not designed to work with these chemicals.
Always empty the water tank after each use and rinse with clean water.

Wipe outer surfaces with a damp cloth.

Avoid operating the appliance in humid or moist places.

Do not locate the appliance near a heat source or direct sunlight.

Always ensure the steam outlet hole is clean and free from scaling and not blocked.

NOTE: this garment steamer is designed to use normal tap water..
Troubleshooting guide
Problem
the steamer does not heat up
The steamer does not produce steam
Water spills from the water tank
The steamer is producing a loud humming or
pumping sound
The steamer does not seem to be removing
creases easily
Unsure when to use the fabric brush
Avoiding discolouring of metal accessories on
the garment
Possible solution
Check main plug is inserted correctly.

Check power supply.

Check power button.

Check the water level and the water tank

inlet cover is properly covered.
Press the steam activation button harder.

Hold the steamer in an upright position.

Make sure water is not over the

MAXIMUM level.
Make sure water tank inlet cover is

properly closed.
Always use the steamer in an upright

position as per the operating instructions.
Check water level; if there is no water or it

is low , refill the water tank.
Hold the steamer in an upright position

and stretch the fabric downward to ensure
best results.
Use when steaming is to directly touch the

fabric.
When steaming delicate fabric, such as

silk to reduce the risk of water dripping
onto the garment while steaming.
Do not directly hover the garment steamer

over the metal accessories.
Use caution and steam around the metal

accessories.