Pinion E-DRIVE SYSTEM Manual De Usuario página 58

you can adjust the individual reach of the thumb, depending on
the riding position and the resulting wrist angle. You can set
the button assignment individually, see the chapter Settings.
Mounting options
The TE1 E-trigger shift lever is designed for mounting on the
right-hand side of the handlebar.
● Instead of the Pinion clamp, the TE1 can also be mounted
with combination clamps from other manufacturers (such
as Magura ShiftMix 3, SRAM MMX).
● The cable must be attached to the underside of the
handlebar in such a way that the adjustability of the TE1
E-Trigger is guaranteed without sharply bending, crushing
the cable or putting it under tension.
● Make sure that there is no collision with the shift levers
and other components (especially the brake) when
operating them.
Adjustability
To ensure optimal accessibility of the shift levers, for all hand
sizes and preferences, a wide range of adjustment options can
be selected.
● The TE1 should be positioned on the handlebars in such a
way that you do not have to remove your right hand from
the grip to reach both shift levers with your thumb.
● For optimum accessibility, the clamp can be positioned to
the left or right of the brake lever clamp. Fine adjustments
can be made via the two screw-on points on the TE1.
● You can also change the button assignment of the TE1 in
the settings of your e-bike.
58