Power Dynamics PDC30 Manual De Instrucciones página 3

UNPACKING INSTRUCTION
CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be
returned, it is important that the product is returned in the original factory box and packaging.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
POWERSUPPLY
The label on the back/under side of the product indicates the mains voltage to which it must be connected. Check that the mains
voltage corresponds to this. Any other voltage than the one indicated may cause irreparable damage to the unit. The unit must
also be connected directly to the mains voltage and no dimmer or adjustable power supply may be used.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.
FRONT PANEL
1. DISPLAY: The display shows multiple forms of information, for example current MODE, elapsed time, etc.
2. USB PORT: You can play media files from a USB device (max 64GB) by connecting the device to this slot.
3. SD CARD SLOT: You can play media files from an SD card (max 64GB) by inserting the card in this slot.
4. MODE BUTTON: Press to change modes (USB, SD, AUX en BT).
5. PREVIOUS TRACK: Press to go to previous track in MP3 and BT mode. Press and hold to lower MP3 or BT volume.
6. PLAY / PAUSE: Press this button to start or pause play.
7. NEXT TRACK: Press to go to next track in MP3 and BT mode. Press and hold to raise MP3 or BT volume.
8. REPEAT MODE: Press to change repeat modes (Folder, Single, Random, All).
9. MIC INPUT JACKS: Connect a microphone (or for example a musical instrument) to the 6.3mm jack input. The microphone
channels have priority.
10. MIC OUTPUT LEVEL CONTROL: Adjust the volume of the MIC channels.
11. AUX OUTPUT LEVEL CONTROL: Adjust the volume of the AUX channel.
12. MASTER OUTPUT LEVEL CONTROL: Adjust the mix volume of the unit.
13. POWER SWITCH: Turn the device ON or OFF.
All manuals and user guides at all-guidesbox.com
3