ortizan M8 Manual Del Usuario página 4

Heavy Bass Mode
The speaker defaults to Normal mode, short press the "BASS" button to switch to Heavy Bass mode.
Long press the "BASS" button to clear Bluetooth pairing information, after a beep sounds the speaker
will restore default settings and auto power off.
SD Card Mode
Turn on the speaker, insert the SD card to play music.
AUX Mode
Turn on the speaker, using a 3.5mm audio cable to connect the speaker to your Bluetooth device, then
the speaker plays music via the audio cable.
Pause Function
Press the " >I" button to start /pause music.
Reset Function
Using a long fine needle long press the reset button 6s in the AUX port, the speaker will have reset tone
and auto power off.
Auto Power Off
The speaker will auto power off after 20 minutes if it does not pair with any Bluetooth device or does not
play any sound after pairing. When in low battery, the speaker will auto power off as well.
T-W-S Mode
1. Turn on the two speakers (disconnect the speaker from the other Bluetooth device).
2. Short press the "ECHO" button 2s on one of the speakers, and it will have a voice prompt after the
pairing is successful. After the pairing is successful, the blue indicator light will flash on the master
speaker, and the slave speaker's blue indicator will be off.
3. Release the "ECHO" button, T-W-S connection may take a few seconds.
4. Turn on the Bluetooth device, and select the " M8" for Bluetooth pairing(Two speakers display one
Bluetooth name)
3