Exo Terra PT2461 Manual De Instrucciones página 2

INDEX
ENGLISH
FRANÇAIS
ESPAÑOL
2
Thermostat 300W
Dimming & Pulse Proportional
PT2461
THERMOSTAT
Operating
Instructions
Thank you for purchasing the Exo Terra
Timer. Please read this operation manual carefully before use and
operate according to the instructions provided for maximum safety
3
and performance. We recommend that you keep this manual handy
for future reference.
10
• Dimming & Pulse Proportional function controls terrarium
temperatures very accurately
26
• From 64°F up to 100°F (18°C up to 38°C)
• Red LED will indicate when heating device is ON
• Recessed dial to prevent accidental temperature change
• Waterproof remote temperature probe
• Ideal for use with Heat Mats, Heat Cables, Ceramic Heaters and
Incandescent Heat Bulbs
• Controls heating devices up to 300W
Can be used with the following Exo Terra
Day & Night Heating:
• Heat Mat (PT2015/16/17/18)
• Heat Cable (PT2011/12/13)
• Ceramic Heater (PT2044/45/46/47/48)
• Infrared Basking Spot (PT2141/42/44/46)
• Night Heat Lamp (PT2120/22/24/26/30 & PT2058/59)
Day Time Heating:
• Daytime Heat Lamp (PT2100/02/04/10/11/12/14)
• Daylight Basking Spot (PT2195/31/32/33/34)
• Intense Basking Spot (PT2196/35/36/38/40)
Reptiles are ectotherm, and use heat from an external source to
thermoregulate their optimal body temperature. Most reptiles use
direct radiant heat from the sun in combination with conductive heat
from sun-heated surfaces such as branches, rocks or other heat
accumulating structures. Providing such an appropriate, species
related, temperature gradient in the terrarium is an important
factor in successful reptile keeping. With the Exo Terra 300W
Dimming & Pulse Proportional Thermostat you can create a well-
controlled heating system that allows you to maintain the required
temperature conditions similar to those found in a desert or tropical
environment. The Thermostat will also help to prevent overheating
and undercooling during hot summer days or cold winter nights. The
Dimming & Pulse Proportional function keeps the temperature at the
desired set-point with a much higher accuracy than conventional
thermostats and virtually eliminates temperature swings in the
terrarium. A Red LED will indicate when the heating device is
powered and once the set temperature is reached, the LED will
switch to Blue. Simply connect your Heat Mat, Heat Cable, Ceramic
Heater or Incandescent Heat Bulb to the Exo Terra Thermostat, set
the preferred temperature and place the heat sensor in the desired
Thermostat with Day/Night
®
heating sources:
®