Futurelight LB-12 TCL LED-BAR Color Changer Manual Del Usuario página 27

OPERATION
Connect the effect to the mains and switch it on via the POWER-switch.
Attention: After every 10 LB-12 TCL LED-BARs, the fixtures must have a renewed connection with the
power mains.
Stand Alone-operation
In the Stand Alone mode, the FUTURELIGHT LB-12 TCL LED-BAR can be used without controller. You can
do without a controller as the features a built-in microphone, which provides automatic sound control.
Disconnect the FUTURELIGHT LB-12 TCL LED-BAR from the controller.
Please refer to the instructions under Control Board, Main functions, menus Mode, Play and Sound.
Master/Slave-operation
The master/slave-operation enables that several devices can be synchronized and controlled by one master-
device.
On the rear panel of the LB-12 TCL LED-BAR you can find an XLR-jack (DMX Out) and an XLR-plug (DMX
In), which can be used for connecting several devices.
Choose the device which is to control the effects. This device then works as master-device and controls all
other slave-devices, which are to be connected to the master-device via a balanced microphone lead.
Connect the DMX OUT-jack with the DMX IN-plug of the next device.
Please refer to the instructions under Control Board.
27/63 00032438.DOC, Version 1.0