Publicidad
Idiomas disponibles
Idiomas disponibles
Set the timer:
• The product has a timer (3b) with an acoustic signal lasting 8
seconds or 12 seconds to measure how long the hair remains on
the iron. The longer the hair remains on the iron, the longer the curl
EN
will hold. For long hair, we recommend selecting 12".
• To set/change the desired seconds, press the timer button (3b) for
longer than 2 seconds; a double acoustic signal will indicate that
the setting has been made and the selection duration will appear
on the display.
• To start the timer once the hair has been wrapped around the iron,
press the timer button (3b); an acoustic signal and a flashing LED
will indicate that the timer has started. Hold the hair in position until
another acoustic signal is emitted (which indicates the end of the
selected seconds), then release by winding the hair in the opposite
direction.
To create waves:
• Use the thermal protective glove (6) provided to protect your hand
from coming into contact with the appliance while winding your hair
around it.
• Using your fingers take a small section of hair (approximately 2 cm);
with smaller sections, the curls will be tighter.
• Wind the section of hair around the heated barrel.
• Press the timer button (3b), an acoustic signal will indicate when
the timer starts.
• Hold the hair in position until another acoustic signal is emitted
(which indicates the end of the selected seconds).
• Release by winding the hair in the opposite direction.
• For the best effect, wait for the curls to cool down.
• Repeat for each section of hair.
• After styling, switch off the appliance by pressing the ON/OFF
button (4); an acoustic signal will indicate it has been switched off.
• Take the power cable (5) out of the socket.
o n .
MAINTENANCE AND CLEANING
• Switch the appliance off by pressing the ON/OFF button (4) and
remove the plug (5) from the power socket.
• Wait until the barrel (2) has cooled down.
• Clean the surface of the accessory and the handle with a damp,
soft cloth.
WARNING! Always disconnect the
appliance from the socket before
cleaning or performing maintenance.
WARNING! Make sure all cleaned parts
are completely dry before reusing the
appliance.
14
Publicidad
