Publicidad
Idiomas disponibles
Idiomas disponibles
TECHNICAL SPECIFICATIONS
Model No.
Voltage
Max. pressure water supply
Max. water temperature
Max. flow rate
Max. pressure
Weight
Lpa (sound pressure)
Lwa (sound power)
Vibration
Only use the following batteries of the AX-POWER
20V battery platform. Using any other batteries
could cause serious injury or damage the tool.
CDA1158 20V, 1.5Ah Lithium-Ion
CDA1154 20V, 2Ah Lithium-Ion
CDA1155 20V, 4Ah Lithium-Ion
The following charger of the can be used to
charge these batteries.
CDA1156 Charger adapter
CDA1157/CDA1175 Quick charger
The batteries of the AX-POWER 20V battery
platform are interchangeable with all the FERM
AX-POWER battery platform tools.
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2-4.
1. Pressure washer
2. Lance extension
3. Adjustable spray nozzle
4. Water inlet
5. Hose connector
6. Hose connector ring
7. Suction hose
8. Floating ball
9. Suction filter
10. Switch lever
11. Release button
12. Battery (not included)
13. Battery unlock button
3. ASSEMBLY
PWM1001
20V
5 bar
40 °C
3.3 l/min
24 bar
Assembly adjustable spray nozzle and lance
1.5 kg
extension
71.9dB(A) K=3dB(A)
Fig. 2
82.9dB(A) K=3dB(A)
1.075 m/s
2
, K=1.5 m/s
2
1. Assembly the lance extension (2) on to the
pressure washer (1).
2. Assembly the adjustable spray nozzle (3) on to
the lance extension (2).
Assembly the suction hose
Fig. 3A/B/C
1. Remove the hose connector ring (6) from the
hose connector (5).
2. Place the ring (6) over the one end of the hose
(7).
3. Push the same end of the hose into the hose
connector, as shown on Fig. 3B.
4. Turn the ring back on the hose connector and
tightly secure by hand.
5. Place the other end of the hose (7) through the
hole in the floating ball (8).
6. Push the same end of the hose on to the
suction filter (9), as shown on Fig. 3C.
Inserting the battery into the machine
Fig. 4
Ensure that the exterior of the battery is clean and
dry before connecting to the charger or machine.
1. Insert the battery (12) into the base of the
machine as shown in Fig. 4.
2. Push the battery further forward until it clicks
into place.
Removing the battery from the machine
Fig. 4
1. Push the battery unlock button (13).
2. Pull the battery out of the machine like shown
in Fig. 4.
Before assembly, always switch off the
machine and remove the battery from
the machine.
7
Publicidad
