Descargar Imprimir esta página

Kenmore Stratus DS1020 Manual De Uso Y Cuidado página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

2. Plug the charging adapter into a wall
outlet.
3. While the vacuum cleaner is being
charged, the battery charging indicator
will flash continuously.
Battery Charging Indicator
4. When the vacuum cleaner has been fully
charged (100%), the battery charging
indicator will turn off.
5. Make sure the vacuum cleaner is fully
charged before using for the first time.
The vacuum cleaner may take up to
5.5 hours to charge completely if fully
discharged.
6. The vacuum cleaner can also be charged
directly in hand vacuum mode. While
charging in hand vacuum mode, the power
switch will flash continuously. When the
hand vacuum has been fully charged, the
power switch will stop flashing and the
light will turn off.
CHARGING
NOTE:
or the power switch does not illuminate
when charging, ensure that:
• The charging plug is plugged into the
power supply properly.
• The electrical supply at the outlet is
powered on.
• The charging adapter is fully inserted into
the charging port.
NOTE:
in temperatures above 104°F (40°C) or
below 39.2°F (4°C). It is normal for the
charger to become warm when charging.
7. Disconnect the charging adapter from the
power supply. Remove the charging adapter
from the vacuum cleaner.
- 9 -
If the battery charging indicator
Never charge the vacuum cleaner
Power
Switch

Publicidad

loading