Descargar Imprimir esta página

PALSON Racer Modo De Empleo página 10

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

GB
4. Use the clipper blade for the areas to be trimmed (sideboards, throat, etc.) and then
slide it upwards and downwards, or from right to left to trim moustaches (hair).
5. When you have finished, put the shaver switch to its initial setting, so that the clipper
folds back inside the appliance.
6. Adjust the angle between the shaver and the skin to 90º for the external blade to
enter in contract with the skin and then apply pressure to the face. Use the other
hand to tauten the skin of the face and then slide the shaver downwards or from right
to left to trim short moustaches.
7. Press the switch to turn off the electric shaver.
8. Clean the shaver.
9. Cover the protective shield to prevent damage to the external blade.
Examples of erroneous operation
1. The external blade is a very fine, precise element. Do not apply pressure to the
internal blade, to avoid damaging it. To prevent risks, all damaged blades must be
replaced immediately.
2. Do not try to assembly or dismantle the internal blade when the appliance is operating.
3. Do not charge the appliance while it is operating.
4. Do not dismantle or use the electric shaver in a brusque fashion.
Method for replacing the internal and external blades
To conserve the excellent shaving capacity of the appliance, replace the external blade
once a year and the internal one every two years.
replacing the external blade
1. Press the buttons at both sides of the external blade support on the appliance and
then remove that support by pulling it upwards.
2. Take a new external blade support, press the support buttons on both sides of the
appliance and then insert the new support in the appliance.
replacing the external blade (fig. 1)
1. Remove the support of the external blade.
2. Press both ends of the internal blade and then pull firmly upwards.
3. Take a new internal blade, align it with the internal blade support and push firmly.
4. Reinsert the external blade support in the appliance.
Cleaning and maintenance
Clean the electric shaver every time you use it, to ensure the blade remains sharp.
10

Publicidad

loading

Productos relacionados para PALSON Racer

Este manual también es adecuado para:

30127