Publicidad
Idiomas disponibles
Idiomas disponibles
5. Release the clip and remove the drive belt cover.
6. Disengage the spring for the drive belt to loosen the
drive belt tension.
7. Remove the drive belt.
Introduction
WARNING: Before you operate the product,
you must read and understand the safety
chapter.
To fill fuel
WARNING: Gasoline is very flammable. Be
careful and refuel outdoors (see
on page 8 ).
CAUTION: Incorrect type of fuel can result in
engine damage. Do not use gasoline that
contains methanol.
The engine runs on unleaded gasoline with a minimum
octane rating of 85 (not mixed with oil). We recommend
biodegradable alkylate gasoline.
Do a check of the fuel level before each use and refuel if
necessary.
Do not fully fill the fuel tank. Keep a space of a minimum
2.5 cm.
297 - 002 - 09.11.2017
8. Hold the front edge of the cutting deck with two
hands and pull it out.
9. Lift the cutting deck and put it against the product or
a wall.
Operation
Fuel safety
To adjust the seat
•
The seat can be tilted forward.
•
To adjust the seat forward and rearward, loosen the
bolts below the seat. Move the seat to the required
position and tighten the bolts.
11
Publicidad
