19 Troubleshooting
This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
19.1 Safety notices
►
Only qualified electricians, who have been trained by the manufacturer, may carry
out any repairs on electrical equipment.
►
Improperly performed repairs can cause considerable dangers for the user and
damages to the device.
19.2 Causes and rectification of faults
The following table assists in localizing and rectifying minor faults.
Error
The selected program
will not start.
Food is not sufficiently
defrosted, warmed up
or cooked after preset
time has elapsed.
The device functions
but the cooking
chamber lighting does
not work.
caso C1800M / C2100M
Attention
Possible cause
Device door is not closed
Power plug is not plugged in
Fuse is not activated
Incorrectly selected time or
power level
Defective cooking chamber light.
Place the splash guard at original position.
Make sure that the 3 hooks and the back
are inserted into the openings again. Flap
the splash guard up and press it behind the
edge. For this press your thumbs into the
inlets (a) again.
Action
Close device door
Plug in mains plug!
Activate fuse
Re-set time and power level
Repeat process
Have Service dept repair
cooking chamber light.
55