Quicke Flexibal 200 Manual De Instrucciones página 20

Warranty Conditions
7. WARRANTY CONDITIONS
ÅLÖ AB undertakes, for a period of 12 (twelve) months from the day that the loader/equipment was delivered to the purchaser,
to replace or repair components which need to be rectified due to faults in the material or manufacturing. This is on condition
that the fault is immediately notified to the supplier, and that the faulty loader/component is made freely available to the
supplier.
For replaced components, the warranty is valid only for the remaining duration of the original warranty.
The warranty does not cover faults caused by accidents, inadequate maintenance, modification or incorrect installation by the
purchaser. When heavily worn components are replaced under warranty, the purchaser shall be charged for the time that they
have been used.
No compensation will be given for personal injury, stoppage, consequential damage or other losses.
Testing or fault diagnosis at the request of the purchaser will be carried out without charge to the purchaser if defects are
established in that connection.
Otherwise the purchaser is charged for all costs.
Temporary repairs or extra costs incurred since work has been done outside ordinary working hours will not be compensated.
EU DECLARATION OF CONFORMITY
(Directive 2006/42/EC, Annex 2A)
ÅLÖ AB
Brännland 300
SE-901 37 Umeå, Sweden
Tel. +46 (0)90 17 05 00
Hereby certifies that:
Attachment models described in this manual, see front, from and including manufacturing month November 2015.
A. manufactured in conformity with the provisions in the COUNCIL DIRECTIVE
dated 17 May 2006 on mutual approximation of the laws of the Member States relating to machinery, 2006/42/EC, with
special reference to Annex 1 of the Directive on essential safety and health requirements in relation to the construction and
manufacture of machines.
B. manufactured according to the following harmonised standards:
EN ISO 12100:2010, EN ISO 4413:2010, EN 12525:2000+A2 2010.
RISE SMP Svensk Maskinprovning AB, Box 7035, SE-75007 Uppsala, Sweden, has carried out voluntary type
examination for ÅLÖ AB. The certificate number is: SEC/09/2051 – hydraulic implements.
The person authorised to compile technical documentation at ÅLÖ AB is Anders Lundgren, Product Development Director.
Umeå 2022-09-01
Niklas Åström
President and Chief Executive Officer (CEO)
18