MAINLINE MLS10005 Instrucciones De Montaje página 2

RECOMMENDED MATERIALS AND TOOLS FOR INSTALLATION
 Drill
 Measure Tape
 Screw Driver
 Sharp Knife or Scissors
BEFORE INSTALLING
 Due to the nature of the installation, undermount lavatories should be installed by
trained and experienced installers.
 Do not use adhesives or adhesive sealants with this product.
 Inspect the waste and supply tubing; replace if necessary.
 Install so future removal from underneath the countertop is possible to avoid
damage to the countertop.
 Prior to installation, unpack the lavatory and inspect it for damage. Return it to its
carton until you are ready to install it.
 Observe all local plumbing and building codes.
INSTALLATION PROCEDURE
NOTE: Install so future removal from underneath the counter is possible to avoid
damage to the countertop.
Check the desired lavatory location for clearance between the
backsplash, faucet, fixture, and cabinet.
 Cut out the template.
 Carefully position and trace the template on the countertop as directed on the
template.
 Mark the faucet hole centerline on the countertop.
 Drill a ½" pilot hole on the inside of the cut line.
 Cut out the countertop opening with a saber or keyhole saw.
 Jig Saw
 Pencil
 Quality Sealant
 Keyhole Saw