Miniland Solar-Dinamo Auto Manual Del Usuario página 17

Put switch (11) through the front cover
in the rectangular hole (15) of body (1).
Connect two leads of the
gearbox (2) through two
holes of the body (1) to the
nearest pair of springs on
body (1). Connect red lead to
B and the black lead to A .
Connect any pair of the leads of the switch
A
to springs
Remember to always put the red lead(s) on
the right and always put the black lead(s)
on the left. Connect another pair of leads of
the switch to the nearest pair of springs
B
on the adapter (12). Black to 1 and red
to 2 .
B
. Same as the above,
Insert adapter (12) into the two rectangular
holes (16) of body (1).
Insert the round head of solar panel
rod (131) into the center hole of the
solar panel (13), and then place the
other end of solar panel rod (131)
into the hole (18) on the body (1).
A
Then connect two leads of the solar
panel (13) to the lower two springs
3 4 of the adapter (12). Red lead to
4 and the black lead to
3
.
17