Descargar Imprimir esta página
Ocultar thumbs Ver también para FSCC60PWM-BL:

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Solar Charger Mounting Bracket
Support de montage pour chargeur solaire
Soporte de montaje del cargador solar
Installation Guide
Guide d'installation
Guía de instalación
Model/Modèle/Modelo:
FSCC60PWM-BL
Features
• High current connectors.
• Allows for pre-installation
of cables for solar panel and
battery connection.
• Compatible with Furrion MPPT
Solar Charge Controllers
(models FSCC30PW and
FSCC60PW).
• Easy to install Furrion MPPT
Solar Charge Controller.
What's in the Box
Make sure you have the following
items included in the packaging.
If any items are damaged or
missing, contact your dealer.
Item
Description
Quantity
Solar
Charger
1
1
Mounting
Bracket
Flat head
drilling
2
4
screw
(ST4.2*19mm)
English
Wire Size
The wiring and installation
methods must conform to all
national and local electrical code
requirements.
PV Wire Size
Since the PV outputs can vary due
to the array connection method,
the minimum wire size must be
in accordance with the maximum
array short-circuit current. The PV
array is suggested to be connected
by series.
Please use PV Photovoltaic wire,
the reference size as below:
PV short
Maximum
Wire
circuit
Wire
Gauge
current
Length
10A
12AWG
30FT
NOTE: The wire size is only
for reference. If there is a long
distance between the PV array and
the controller, larger wires can be
used to reduce the voltage drop
and improve performance.

Publicidad

loading

Resumen de contenidos para Furrion net-zero FSCC60PWM-BL

  • Página 1 NOTE: The wire size is only Bracket for reference. If there is a long distance between the PV array and Flat head the controller, larger wires can be drilling used to reduce the voltage drop screw and improve performance. (ST4.2*19mm) Model/Modèle/Modelo: FSCC60PWM-BL...
  • Página 2 English English Battery Wire Size • Tighten the screws until • Base on the current of the 2. Choose an appropriate secured. The torque force for MPPT charger you purchased, mounting position and attach The battery wire size must the screw should be 25lbs-inch connect the battery to the the solar charger mounting conform to the rated current, the...
  • Página 3 Français Français Caractéristiques Installation le générateur photovoltaïque et Calibre de fil le régulateur, des fils plus gros peuvent être utilisés pour réduire • Connecteurs à courant élevé. 1. Connectez le panneau solaire Les méthodes de câblage la chute de tension et améliorer et la batterie au support de et d'installation doivent être •...
  • Página 4 Français Français • Un sectionneur CC doit être 2. Choisissez une position installé entre l'entrée solaire de montage appropriée et et le port solaire du support de fixez le support de montage montage. du chargeur solaire sur le Un sectionneur CC doit être mur à...
  • Página 5 Español Español Características Tamaño del cable de la Instalación Tamaño del cable batería • Conectores de alta corriente. 1. Conecte el panel solar y la El cableado y los métodos de El tamaño del cable de la batería batería al soporte de montaje instalación deben cumplir con •...
  • Página 6 Español Español • Se debe instalar un interruptor 2. Elija una posición de montaje de desconexión de CC entre la adecuada y coloque el soporte entrada solar y el puerto solar de montaje del cargador solar del soporte de montaje. en la pared con cuatro tornillos Se debe instalar un interruptor autorroscantes.