Breville BCP600 Manual De Instrucciones página 9

Troubleshooting
Will not work
Motor Overload
Protection
•
Switch not in the ON position.
•
Juice Press Arm not lowered.
•
Juicing Cone or Fruit Dome not assembled properly.
•
Filter not assembled properly.
•
Motor Overload Protection may have operated (see below).
•
The Citrus Press is equipped with with an internal overload protector to
prevent the motor from being damage under heavy or continuous loads. If the
motor suddenly stops working, turn OFF the ON/OFF button and unplug the
unit from the power outlet. Allow the unit to cool for up to 30 minutes before
operating again.
NOTE: The unit MUST be unplugged from the power outlet to properly cool.
•
Despite this overload protector, we suggest juicing in smaller batches in order
to protect the Motor.
EN
9