2.1 Hardware Overview
• Hardware Components
This remote keyboard contains easy to use control keys on the front and simple input and output connectors on
the back.
• Control Buttons & Connection
The unit provides the primary operator interface. Most operations are one or two button presses.
The following Table contains a description for each buttons on the keyboard and port of cable connection.
Use Figure and Figure as a reference.
2.2 Control Buttons
Figure
No.
Button
ESC/POWER
1
LCD DISPLAY
2
6 x Graphic Display
NUMBERS
3
CONTROLLER
FUNCTION KEYS
4
7
3
4
Description
Pressing the ESC/POWER button enters the Power on/off or escape key. Right
description led on (red). Pressing it again exits the POWER OFF.
(Push the button
(about ~3 seconds) and then POWER OFF)
Displays Camera ID, Protocol, Function status, General status, etc.
Camera ID setting value change, PTZ setup ( +
Main setup ( +
)
Hold : System locking (Unlocking: Input the Pass word 4 digit ****)
SHIFT/TURBO: SHIFT-Key for special function (Customize) / TURBO -High Speed
AUX: External equipment on/off
SET: PTZ and main setup ( +
IRIS CLOSE: Camera Iris close
IRIS OPEN: Camera Iris open
8
5
6
),
), (+
)