Publicidad
Idiomas disponibles
Idiomas disponibles
Figure 2
1. Attach the Wheels (63) to the Tank (70), using the Bolts (64) and Hex Nuts (65).
Cylinder head (7)
Figure 3
2. Thread the Air Filter (6) onto the side of the Cylinder Head (7).
3. Break in the new Air Compressor as follows:
a. Make sure the Power Lever is OFF and the unit is unplugged. Insert a male coupler (sold separately) into the
female Quick Coupler (76) and fully open all regulators and valves.
b. Plug in the Power Cord.
c. Turn the Power Lever ON.
d. Let the unit run for 30 minutes. Air will expel freely through the Coupler.
e. Turn the Power Lever OFF.
f. Unplug the Power Cord and remove the male coupler.
7
www.ELITETOOLS.co
Keep Working
Publicidad
