Publicidad
Idiomas disponibles
Idiomas disponibles
2. Any cleaning, maintenance or servicing must be carried out once the unit has cooled down
completely.
3. Remove any residues, such as hair or dandruff, which remain on the appliance after use.
4. Clean the different parts of the appliance with a damp cloth.
5. Never use any abrasive agents or solvent.
Drawing of the device
Figure 1
1
Body
Rotary button
2
Display
3
Switches and
4
USB
5
Charging instructions:
1. Fully charge the battery before use for optimal operation, insert the micro USB part into input and the
other USB into any other device of your choice (computer, adaptor, powerbank,etc).
2. Do not use while charging.
3. Disconnect the charger when the battery is fully charged.
4. While charging, the display shows a flashing indicator light. When the battery is fully charged, the
indicator stops flashing and shows 4 bars.
5. When the battery level is low, the display flashes and the unit will automatically switch off.
Use of the device
1.
Press and hold the power button (fig. 1 right button) for 2 seconds to start the product. You will hear a
"beep" and the LCD display will light up. The product will start to heat up according to the temperature
indicated by the power on.
2. Press and hold the power button for 2 seconds to turn the product off. If you forget to turn off the product,
it will automatically turn off after eight minutes.
3. Press the power button to select the temperature, temperature display mode and timer, you need to
press once to select each setting one by one.
Then press the menu button (fig. 1 left button) to scroll through the degrees °C/°F, the time in seconds
or the temperature display mode, press and hold to confirm your choice.
•
Degrees : ℃ or F
Temperatures: 160℃, 180℃, 200℃.
•
Time 6, 8, 10, 12 or 14seconds
•
4. Press the adjustable button, the left or right, (fig. 1) to choose the rotation direction and make your loops.
Note:
The heating symbol flashes during heating. When it reaches the selected temperature, it stops flashing
and beeps twice.
5. Comb your hair to avoid tangles and divide the hair into section of up to 2 cm wide. Let the section of
hair through the curling chamber (fig.2), press the left or right adjustable button to to choose the
rotation direction and activate the motor to draw hair into curling chamber.
function buttons
www.livoo.fr
EN
Publicidad
