Micro FLEX Manual Del Propietário página 7

To Raise/Lower Steering Tube Height
Open clamp (E), adjust steering tube to desired height, then fi rmly close
clamp, making sure that it applies clamping force to the steering tube.
Should there be no brass push button or if a different handlebar height is
desired, the knurled screw (F) can be additionally tightened with a hexagon
socket screw key.
G
If clamp is loose
F
In case (E) fails to tighten suffi ciently any longer, readjust the knurled screw
E
(F) manually by means of a hexagon socket screw key until the desired
effect is obtained again.
Brake System
Your MICRO SCOOTER has a unique and innovative brake system. To activate
brake, apply fi rm pressure on rear fender with right or left foot.
Attention! Brake fender does get very hot - do not get burned!!
7