Beper 90.344N Manual De Instrucciones página 11

Stand Mixer Use instructions
GENERAL SAFETY ADVICE
READ THE OPERATING INSTRUCTIONS CAREFULLY BEFORE FIRST USE OF THE
APPLIANCE.
Read the following instructions carefully, since they give you useful safety information
about installation, use and maintenance and help you avoid mishaps and possible acci-
dents.
Remove the packing and make sure that the appliance is intact, with special attention to
the supply cable. The elements of the packing (plastic bags, polystyrene, etc) do not have
to be accessible to the children, in order to preserve them from danger sources.
It is recommended not to throw these packing material in the domestic waste, but to deliver them
to the appropriate station of collection or destruction refusals, asking eventually information to the
manager of the Sanitation Department of your own municipality.
Before connecting the appliance make sure that the mains voltage corresponds to the data speci-
fied on the label.
If the plug does not suit the socket, let it be replaced with another suitable plug by qualified person-
nel only, which shall also ensure that the section of the socket cables is suitable for your appliance
power absorption.
Never pull the supply cord to unplug the appliance.
Make sure that the supply cord never comes into contact with hot or cutting surfaces
Do not use this appliance if the supply cord is damaged. In case of damage, it must be replaced by
the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Only connect this appliance on alternating current
Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they
be necessary, please use only simple or multiple adaptors and extensions in compliance with the
safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors
and the extensions and the maximum power limit marked on the multiple adaptor are not exceeded.
This appliance is to be destined to its special purpose only.
Any other use is to be considered as improper and thus dangerous. The manufacturer cannot be
responsible for any damages deriving from improper, wrong or incautious use.
To avoid any heating risk, it is recommended to unroll completely the supply cord and to unplug the
appliance, when not used.
Before cleaning, always unplug the appliance.
To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water
or other fluids.
Do not hold the appliance with wet hands or feet.
Do not hold the appliance with naked feet.
Do not expose the appliance to atmospheric agents such as rain, wind, snow, hail.
Do not use the appliance near explosives, highly flammable materials, gases, burning flames, he-
aters.
Do not allow children, disabled people or every people without experience or technical ability to
use the appliance if they are not properly watched over. Close supervision is necessary when any
appliance used by or near children.
Make sure that children do not play with this appliance.
If you decide not to use the appliance any longer, make it unserviceable by simply cutting the supply
cable after disconnecting the plug from the socket. Also make any dangerous parts unserviceable,
especially for children who could play with the appliance.
11