Roadstar RU-375BT Manual De Instrucciones página 6

2 English
TO USE THE RADIO
Press the [MODE] button (4) to power ON;
Select the desired audio source by pressing the [MODE] button (4);
(Please see detailed instructions for each Source in the following chapters);
Adjust the volume with the [VOLUME KNOB] (1) to the desired level;
To power OFF the radio, press and hold the [MODE] button (4).
CLOCK SETTING
Press and hold [CLOCK] button (6) to access to the menu;
Use the [VOLUME KNOB] (1) to adjust the hour;
Confirm with the [CLOCK] button (6);
Use the [VOLUME KNOB] (1) to adjust the minutes;
Confirm with the [CLOCK] button (6).
NAVIGATE INTO THE MENU
Press the [VOL KNOB] button (1) to access to the options;
Use the [VOL KNOB] (1) to select setting preferences;
Press the [VOL KNOB] button (1) to confirm.
You can setting: VOL, BASS, TREBLE, BALALNCE, FADER, LOUDNESS, EQ (POP,
ROCK, CLASSIC,JAZZ, FLAT), DX FM reception and STEREO/MONO.
Confirm with the [ENTER] button (18);
Repeat step 2 and 3 to set other preferences.
FM RADIO OPERATION
Select "RADIO" mode by pressing repeatedly the [MODE] button (4);
Select desired band by using the [BAND] button (5);
Press to scan the next/previous available station
Note: Press and hold (2 seconds) the [TUNE -/+] buttons (2/3) to select manual
(steps of 0.05MHz) or auto scan (next/previous available station).
STORE RADIO STATIONS AUTOMATICALLY:
Press & Hold the [AMS] button (5) (for 3 seconds) and the radio will automatically
scan the radio. During the scanning process, the radio will save the scanned stations
sequentially into the memory.
PRESET
There are 6 x 3 (FM1, FM2, FM3) presets available for FM, set the desired radio sta-
tion frequency as explained previously;
Press and hold the [PRESET] button (12 to 17 of the remote).
To Recall a preset station press the [PRESET] button (12 to 17).
RDS OPERATION
If RDS singal is received, you can chose some RDS settings (Long press [VOL
KNOB] (1) .
AF: Alternative frequencies, TA: Traffic announcement and PTY: Program type (news,
classic, rock etc). These settings can be turned on OFF.