Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
3. To Start/Stop the Hedge Trimmer
• Make sure that you have a secure and
balanced footing.
• Stand upright and hold the hedge trimmer in
a relaxed position.
• Make sure that the cutting blade is not
touching the ground or any other objects.
a. To turn the hedge trimmer ON, press the front
trigger switch (C) with one hand. With the other
hand, press the lock-off button (D) and then
press the rear trigger switch.
b. To turn the hedge trimmer OFF, release either
front or rear trigger switch.
WARNING
• Always remove the battery pack from the hedge trimmer during work breaks and after
finishing work.
4. To Rotate the Rear Handle
WARNING
• Do not attempt to rotate the rear handle while
the tool is running.
a. Turn the tool off and pull the rear handle
rotation lock hook (G) out.
b. The rear handle can be turned 90° left or right
in 45° increments. When the handle reaches
the desired 45° or 90° position (left or right),
release the rear handle rotation lock hook (G),
which will automatically lock the rear handle in
the desired position.
5. Using the Hedge Trimmer
WARNING
• If any parts are missing, damaged or broken, do not operate your trimmer until they have
been replaced. Failure to do so could result in possibly serious personal injury.
• To prevent serious personal injury, always use both the front handle and the rear handle to
hold the hedge trimmer during operation. Keep hands away from blades. Do not attempt to
remove cut material or hold material to be cut when the blades are moving.
• Make sure that the blades have stopped completely and the battery pack is removed before
clearing jammed material from the blades. Do not grasp the exposed cutting blades or
cutting edges when picking up or holding the trimmer.
• Clear the area to be cut before each use. Remove all objects, such as cords, lights, wires,
or strings, that could become entangled in the cutting blade and create a risk of serious
personal injury.
3
C
4
11
E
D
G
Publicidad
