Adata SU800 Guía Para Instalar página 52

BEFORE INSTALLATION
1. GATHER THE THINGS YOU'LL
NEED
PC, Phillips screwdriver, and ADATA 2.5" SATA
SSD
*Please use a standard Phillips screwdriver (3.5mm) for
disassembling the case.
2. BACK UP YOUR DATA
Make sure to backup the important data on your
PC to an external device, such as an external
HDD, before starting installation.
3. POWER OFF YOUR PC
After backing up your data, power off your PC
to avoid data loss or damage to other
components during installation.
4. UNPLUG POWER CORD AND
BATTERY
This action is necessary to discharge residual
power that can damage your PC and its
components.
*The battery removal step applies only to laptops when
it's possible to remove the battery. To see how to remove
the battery, refer to your user manual.