Samsung LE32R3 Manual Del Propietário página 15

Resetting the Picture Settings to the Factory Defaults
Changing the Picture Size
You can select these options
by simply pressing the P.SIZE
button on the remote control.
Freezing the Current Picture
Digital Noise Reduction
You can return to the factory defaults picture settings.
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3 on page 12.
2. Press the or button to select "Reset", then press the ENTER button.
3. Press the EXIT button to exit.
The "Reset" will be set for each picture mode.
You can select the picture size which best corresponds to your
viewing requirements.
1. Press the MENU button to display the menu. Press the
select "Picture", then press the ENTER button.
2. Press the or button to select "Size", then press the ENTER button.
3. Select the required option by pressing the
Press the ENTER button.
4. Press the EXIT button to exit.
Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
4:3: This is the default setting for a video movie or normal broadcasting.
"Auto Wide" function is available only in "TV", "Ext1", "Ext2", "AV", and "S-Video" mode.
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
Select by pressing the
picture up and down. After selecting
picture size in the vertical direction.
Press the STILL button to freeze a moving picture into a still one.
Press again to cancel.
If the broadcast signal received by your TV is weak, you can activate the Digital
Noise Reduction feature to help reduce any static and ghosting that may appear
on the screen.
1. Press the MENU button to display the menu. Press the
select "Picture", then press the ENTER button.
2. Press the or button to select "Digital NR", then press the ENTER button.
3. Press the or button to select "On" or "Off". Press the ENTER button.
4. Press the EXIT button to exit.
English-13
or
or buttons. Use the or
, use the or
or button to
button.
button to move the
button to magnify or reduce the
or button to