Publicidad
Idiomas disponibles
Idiomas disponibles
rose Arch
Introduction
Q
Familiarise yourself with the product prior to assembly. Carefully
read the following assembly instructions and safety tips. Only use
the product as instructed and only for the indicated field of appli-
cation. Keep instructions in a safe place. Submit all documents to a third party
if distributing the product.
Intended Application
Q
This product is indended as a climbing aid for plants. Any use other than
previously mentioned or any product modification is prohibited and can lead
to injuries and / or product damage. The manufacturer is not liable for any
damages caused by any use other than for the intended purpose. The product
is not intended for commercial use.
Description of parts
Q
Intermediate stanchion
1
Ground anchor with bolt
2
Ground anchor without bolt
3
Connection piece
4
Bend
5
Screw (approx. 17 x ø 5.7 mm)
6
Peg
7
Mounting bracket
8
Screw (approx. 12 x ø 4.6 mm)
9
Nut
10
Dimensions and Material
Q
Material:
Metal
Dimensions:
approx. 133 x 260 x 38.5 cm (W x H x D)
Scope of Delivery
Q
Check the delivery for completeness and condition of the product immediately
after opening and ensure all parts are included. Do not assemble product if
delivery is incomplete.
11 intermediate stanchions (approx. 35.5 cm)
2 ground anchors with bolt (approx. 49.2 cm)
2 ground anchors without bolt (approx. 49.2 cm)
12 connection pieces (approx. 51.3 cm)
8 bends (approx. 55.5 cm)
23 screws (approx. 17 x ø 5.7 mm)
4 pegs
4 mounting brackets
8 screws (approx. 12 x ø 4.6 mm)
8 nuts
1 assembly instructions
Safety instructions
J
WArnInG!
AccIDentS FOr InFAntS AnD chILDren! Never
leave children unattended with the packaging material. Risk
of suffocation keep children out of reach.
J
c AUtIOn! rISk OF InJUrY! Ensure that all parts are undamaged
and have been assembled appropriately. Risk of injury exists if assembeled
incorrectly. Damaged parts can effect safety and function.
6
GB/MT
DAnGer tO LIFe AnD rISk OF
J
c AUtIOn! Do not leave children unattended! The rose arch is not a toy
or climbing equipment! Ensure that persons, in particular children do not
climb onto the rose arch and do not use it as a leaning post. The rose
arch may overbalance and tip over.
J
E nsure that the rose arch is only assembled by skilful adults.
J
E nsure that you place the rose arch on a solid and even surface. Do not
place the rose arch on sand. Non-observance may lead to a risk of injury
and / or product damage.
J
E nsure to secure the rose arch firmly into the ground. Check the ground
anchoring and tighten the screws
secure the product against tipping over. The rose arch may overbalance
and tip over.
J
D o not hang any items from the rose arch. Non-observance may lead to
risk of injury and / or product damage.
Assembly
Q
Proceed as follows:
1. When starting to assemble, arrange 6 connection pieces
one ground anchor with bolt
into an arch shape (see Fig. A). Subsequently join the parts together.
note: Ensure that the underground is solid and even.
2. Attach the intermediate stanchions
Fig. A (see Fig. B). Align holes when connecting
note: Do not tighten screws
3. Arrange 6 connection pieces
bolt
and one ground anchor without bolt
2
sequently join the parts together (see Fig. A).
4. Attach the second arch with 11 screws
(see Fig. C).
5. Retighten all screw connections.
6. Press the rose arch firmly into the ground in order to ensure a safe stand-
ing position. Ensure that the ground anchors
by at least 20 cm and the width of rose arch is approx. 133 cm.
7. Enhance the stability of the product by fixing it to the ground with the
supplied pegs
. To do so attach the mounting brackets
7
anchors
,
using the screws
2
3
the pegs
through the openings in the mounting brackets
7
the soil.
cleaning and care
Q
j
T o clean use a damp, lint-free cloth.
Disposal
Q
The packaging is made entirely of recyclable materials, which you
may dispose of at local recycling facilities.
Contact your local refuse disposal authority for more details of how to dispose
of your worn-out product.
Product Description:
Rose Arch
Model No.:
Z6735A
Version:
10 / 2010
on a regular basis. If required,
6
, 4 bends
4
and one ground anchor without bolt
2
with 11 screws
with parts in
1
6
,
,
,
2
3
4
5
completely.
6
, 4 bends
, one ground anchor with
4
5
for the second arch. Sub-
3
to the intermediate stanchions
6
,
reach into the ground
2
3
to the ground
8
and nuts
(see Fig. D). Then push
9
10
8
,
5
3
.
1
and into
®
Publicidad
