Marmitek WHE-1 Modo De Empleo página 12

5 Use
5.1 HD transmitter and HD receiver
1. Turn ON the second TV or projector and select the correct HDMI input to which
the HD receiver is connected.
2. Turn ON the HDMI source.
3. Use the switch at the back to turn ON the HD transmitter and HD receiver.
4. During system startup (60 sec.) a startup screen will appear on the HD transmitter
and the orange ''LINK'' light on both the HD transmitter and the HD receiver will
flash until the signal connection between the two has been established.
5. When the connection is established and the HDMI source is properly connected, a
video signal will appear on the (second) TV.
6. With proper operation, the green ''WIRELESS'' light will flash, the orange ''LINK''
light will be lit continuously and the ''INPUT/OUTPUT'' light will be solid blue.
7. If no video signal appears, check the lights according to the overview in section
5.2.
Please note: To be able to watch TV locally (via the HDMI output of the transmitter),
the HD transmitter should always be switched on.
12 © MARMITEK