EN
Note: When using the air fryer for the first time, a slight smoke or
odour may be emitted. This is normal and will soon subside. Allow
for sufficient ventilation around the air fryer during use. It's advised to
run the air fryer without food for approx. 10 minutes before first use;
this will prevent the initial smoke or odour from affecting the
taste of the food.
FUNCTIONS
AIR FRYER, FRIES, WINGS, BACON, FISH, VEGETABLES, BAKE,
CHICKEN, BROIL, PIZZA, KEEP WARM, DEFROST.
Icons
Preset
Air fryer
Fries
Wings
Bacon
Fish
Vegetables
Bake
Chicken
Broil
Pizza
Keep warm
Defrost
Time
Temp.
20 min.
200°C
15 min.
200°C
25 min.
200°C
6 min.
190°C
10 min.
190°C
20 min.
200°C
25 min.
170°C
25 min.
200°C
12 min.
200°C
15 min.
180°C
15 min.
150°C
30 min.
90°C
6
USING THE APPLIANCE
Using instruction for this air fryer.
STEP 1: Plug in and switch on the air fryer at the mains power
supply; the air fryer will beep and the power button will illuminate to
indicate that the unit is plugged in.
STEP 2: Tap the power button to switch on the air fryer; the LED
display will show "180°C" and 15MIN", indicating that the time and
temperature are ready to be programmed.
STEP 3: Following the instructions in the section entitled'Using the
Digital Control Panel" , preheat the air fryer for approx.5 minutes.
Use + or - to increase or decrease the time or temperature if
required.
STEP 4: Once preheated, remove the cooking compartment by
pulling it out of the air fryer using the handle. Place the cooking
compartment onto a flat, stable, heat-resistan surface. Check that
the plastic button cover is over the basket release button to avoid it
from being released accidentally.
STEP 5: Place the ingredients into the non-stick coated cooking
basket and then slide the cooking compartment back into the air fryer
main unit to close it.
STEP 6: Use the digital control panel to set the cooking time
and temperature as required for the ingredients. The time and
temperature can also be set using the "MODE" buttons. This will
automatically cycle between time and temperature presets for
cooking various foods. These presets can then be adjusted using
+ or – to increase or decrease the time or temperature as required.
Then press the power button to begin cooking.
7
EN