Descargar Imprimir esta página

KlipXtreme Tunebar Manual Del Usuario página 5

Publicidad

Idiomas disponibles

Idiomas disponibles

Buttons
Press it to alternate between on and standby modes.
1.
Press it to change all settings to default mode.
2. RESET
Press it to silence the unit. Press it again to activate the sound.
3. MUTE
Press it to increase the volume level.
4. Vol. +
Press it to jump to the previous song.
5.
Note: This function does not work in Aux mode.
Press it to play and pause a track.
6.
Press it to jump to the next song.
7.
Note: This function does not work in Aux mode.
Press it to decrease the volume level.
8. VOL-
Shortcut to Bluetooth mode.
9. BT
Shortcut to HDMI ARC mode.
10. ARC
Shortcut to digital optical mode.
11. OPT
Shortcut to Auxiliary mode.
12. AUX
Shortcut to USB mode.
13. USB
Press this button to toggle through the following EQ
14. EQ
settings: pop, classic, jazz, country, normal, rock.
Description
IV. Preliminary steps
1. The soundbar can be placed on a desktop or hanged on the wall.
2. If you decide to mount the soundbar on the wall, determine the location and
mark the holes on the surface.
3. For gypsum or wooden walls, locate studs in the wall. You may use a stud
finder to determine the center of each stud.
4. Drill pilot holes and insert anchors if installing the unit on a concrete or brick
wall.
5. Drive the screws into the holes with a screwdriver, leaving some space
between the head and the wall surface.
6. Make all necessary cable connections before mounting the soundbar on the
wall (Aux. or optical input cables).
7. Once all connections have been completed, carefully slide the soundbar over
the screws you just installed.
8. By plugging the soundbar Ac cord into a wall outlet, the soundbar will be
ready to use.
V. Optical digital and Auxiliary connections
1. Insert one end of the supplied optical digital cable into the matching input jack
on the back of the soundbar and the other end on the device you wish to play
audio from.
2. Turn on the soundbar by pressing the power button located on the right-side
panel of the unit. You can also press the red power button on the remote
control.

Publicidad

loading

Este manual también es adecuado para:

Ksb-00a