Magnusson 5063022087256 Manual Del Usuario página 46

Tape Measure Mode
The distance will be displayed visually, as with a tape measure.
1. Point the tool's laser toward the wall or object to be measured.
2. Briefly Press the measuring button
3. Press the menu button
mode
4. Short press the measure button
measurement will be conducted in real time.
5. Press the measure button
number will stop and show the measurement data.
Notes: The distance from the marking is shown in the display in the tape
measure function. The reference is not the edge of the measuring tool.
63022087256_MNL_IN_V02.indd 46 63022087256_MNL_IN_V02.indd 46
.
196cm
to turn the tool on.
three times to select the Tape measure
once to emit laser. The
again to stop laser emission, and the
46
19/05/2023 4:32:04 pm 19/05/2023 4:32:04 pm