Philips AC0819 Manual Del Usuario página 5

Productoverview
A Air outlet
B
Control panel
C
Particle sensor
D NanoProtect filter (FY0914 is for AC0819/
AC0820, FY0293 is for AC0830)
Controlsoverview
Filter replacement alert
Mode switch button
The air purifier automatically adjusts the fan speed in accordance with the ambient
Automode
air quality.
Turbomode
The air purifier operates on the highest speed.
Sleepmode The air purifier operates quietly at a low speed. After 3 seconds,the screen lights off.
Followtheinstructionstolearnhowtouseproduct
The visual instructions are divided into different topics, illustrated by the following graphic icons.
Power on/off
Filter replacement
Filter reset
Notes
1
Please scan the QR code to read the full detailed User Manual online to better know about
this product.
2
Make sure the purifier is unplugged from the electrical outlet before installing the filter.
3
The color of air quality light corresponds to the ambient air quality.
4
The appliance operates in Auto mode by default. The brightness of air quality light reflects
the current running mode.
5
Clean the particle sensor with a damp cotton swab.
6
You can also replace the filter before filter replacement alert displays on the screen. After
replacing a filter, you need to reset the filter lifetime counter manually.
Troubleshooting
Please check the troubleshooting at www.philips.com/support when you encounter problems with
the appliance. If you are unable to solve the problem with the information, contact the Consumer Care
Center in your country.
E
Base
F
2 Pin plug adapter (KA1801A-2400750EU)
G Power socket
H Power on/off button
Power on/off button
Mode switch
Storage
Maintanence
EN EN
1