Jaeger Chateaux 18 Instrucciones De Uso página 7

Enfriador de vino
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The temperature may fluctuate depending on whether or not the interior
light is on or off or whether the bottles are located on the upper, middle or
lower section.
LED Display
The display indicates your temperature setting and the actual internal
temperature. When the device is turned on the LED always shows the standard
setting 17°C. Short time after the LED indicates the internal temperature.
How to set temperature
1. Regulate the internal temperature by pressing the buttons "
"
" to increases or decreases the set temperature by 1°C-steps. About 5
seconds after the last button press the electronic switch automatically and
the actual internal temperature will be indicated in display.
2. "
"button turns on or off the interior light.
Notes:
This product is designed for maximum cooling of 14°C below ambient
temperature.
When the ambient temperature around 25°C or less, unit can maintain a
temperature range between 11-18°C.
Only set the temperature as low as needed.
Storing
Fill the device from the bottom to the top, this cools the bottles faster.
The following specifications are only recommendations and are optional:
Wine
Champagne, sparkling wine
Fruit wine
Light red wine / white wine
Dessert wine
Red wine
Notes:
The temperature in the device will be warmer at the top of the cooling zone
and cooler at the bottom. If you are going to store a mixture of wine types in
the device, it is recommended that the red wines are stored at the top of
the cooling zone, white wine in the middle of the cooling zone and sparking
wines at the bottom.
Pre-cool the wine for 2 hours in refrigerator before storing inside the device.
Only switch the interior light on if necessary.
Instructions for use
Temperature
7 – 10° C
10 – 12° C
12 – 13° C
14 – 15° C
14 – 17° C
English
" and
5

Publicidad

Tabla de contenido
loading

Tabla de contenido