Publicidad
Idiomas disponibles
Idiomas disponibles
[Reboot]: Move the cursor to OK and press the settings buttonK e premere il
pulsante delle impostazioni, si aprirà una finestra, scegliere Sì per riavviare la
macchina, scegliere No per annullare
[Upgrade]: Users can upgrade the firmware of the device via SD card
[Format SD card]: Move the cursor to format SD and select OK. Press the settings
button, pop-up window will remind if format SD card is needed. Select yes to forward
or "No" to cancel. If the format card is finished, the notification will say: Format SD card
successfully
[Factory reset]: After confirming by pressing the setting button, it will prompt whether to
restoer the factory setting, Press Yes, 'successful reset' will appear, the system will reboot shortly
[Return]:
Exit the current menu
Nota: The system can be upgraded using the SD card, the system
upgrade is illustrated in the media menu
2. SELECT RINGOTONE
On the system menu move the cursor to "ringt", the press the settings button to enter
the ringtone menu, set up the doorbell of the outdoor camera
There are two types of ringtone patterns: default and user-defined. There are 12 types of default ringtones.
[Mode]:
You can set a default ringtone for door 1 and door2, but only if custom mode is on. When the outdoor unit call
the indoor monitor, both can hear the ringtone chosen by the user.
[Door1]:
The default ringing tone and the defined ringing tone are set in outdoor unit 1. Press the + button to move the cursor
to the first line. Press the set button to confirm the default ring tone for door 1. When the character colour is changed,
press + and - to select the desired default ring tone and press the set button to confirm the setting. Press + to move
the cursor to the second line. Press the set button to confirm the setting of the defined bell ringtone. When the
character colour changes, press + and - to select the desired ringtone. Press the set button to confirm the setting.
The default ringing tone and the defined ringing tone are set in outdoor unit 2. Press the + button to move the cursor
[Door2]:
to the first line. Press the set button to confirm the default ring tone for door 2. When the character colour is changed,
press + and - to select the desired default ring tone and press the set button to confirm the setting. Press + to move
the cursor to the second line. Press the set button to confirm the setting of the defined bell ringtone. When the
character colour changes, press + and - to select the desired ringtone. Press the set button to confirm the setting.
A separate file called 'Ring' is required for the SD card or USB storage device. Music can only be
found and set as a user-defined ring tone when the music is saved in the file named 'Ring'.
39
Publicidad
