EN
5. Operating instructions
DANGER
Before operating or using the log splitter, review the instructions below and all safety information.
safety information. Failure to follow these instructions may result in property damage or injury to the
property damage or injury to operator or bystanders.
Using your distributor
STEP 1: Press split control handle A and split control handle B at the same time, and grasp the lift bracket release handle C
lightly (can be released after the lift rack is lowered). Do not touch the lift control hand if you do not wish to release the lift rack.
STEP 2: Place the timber on the lifting bracket, then push the split control lever A upwards. The timber will slowly lift up along
with the cylinder.
41