Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 1:
Hardware for Step 1:
Insert x4 cam dowels (#1) into side panel A.
Insert x4 cam dowels (#1) into side panel B.
8x #1 Cam Dowels
#1
A
#1
#1
#1
#1
#1
#1
#1
C
#3
BACK
STEP 2:
Insert 8x wooden dowels (#3)
into the 8x small holes on panel
B and then connect with shelf
B
panels C as shown, aligning all
hardware.
Note: The lip of the shelf panels
should be at the front of panel B
facing upwards. The back of panel
B is highlighted by the keyhole
hooks.
Now fix the 4 shelves (C) to
panel B by inserting 4x cam locks
(#2) into the large holes on
the underside panel C and turn
clockwise to lock.
9
C
C
C
#3
#3
#3
#3
#3
#3
#3
pointing towards the drill hole on the side edge of
the panel & the dowel that it will be receiving.
When the panels are in the connected position, using a
FRONT
screwdriver, turn the cam lock in a clockwise direction to lock
and secure
C
#2
Please note:
Turn cam locks 180 degrees
or until tight.
Hardware for Step 2:
8x #3 Wooden Dowels
4x #2 Cam Dowels
Using Cam Locks:
B
When inserting into the panel,
ensure that each cam lock's arrow is
C
C
C
#2
#2
#2
Publicidad
