Storing Stations Manually; Listening To Stored Stations; Fine Tuning (Only For Terrestrial Reception); Tv/Video Device Source Selection - Blaupunkt TV Tuner 04 Instrucciones De Manejo

Operation

Storing stations manually

In addition to the Travelstore seek tuning,
you can also store stations manually.
Use the BAND button 9 to select the
u
TV or CABLE option.
u
Find the desired station (channel).
u
For this purpose, press one of the
SEARCH CH ,
To store the station,
u press the MEM button ;.
To call up the station saved last with MEM,
u press the RECALL button 4.
You can assign a desired program location
to the set station.
u
For this purpose, press the correspond-
ing number button <.
The monitor displays the "PROG" program
location and the "CH" channel.

Listening to stored stations

To listen to stations (channels) stored with
Travelstore or manually,
u
press the PROG CH
or the number buttons < correspond-
ing to the program location.
The monitor displays the "PROG" program
and the "CH" program location.
Fine tuning
(only for terrestrial reception)
To fi ne tune a station,
u press the FINE TUNE button :.
The monitor displays "FINE TUNE SETTING".
u
If necessary, adjust the image for
perfect image quality using the
SEARCH CH ,
20
buttons 3.
button 2
,
buttons 3.

TV/video device source selection

If you connected a video device to the TV
tuner using the appropriate cables, you can
operate its basic functions as usual with the
CCA or CCU.
For this purpose, you must set the TV tuner
to the video device.
u Press the VIDEO button 7 to view the
image of a connected video device.
or
u Press the TV button 8 to view the
image of the TV tuner.
Source switching with the CCA
If the TV tuner is installed in a Classic Line
system,
u
press the VIDEO button on the CCA to
view the TV/video image on the moni-
tors.
To switch the sources with the CCA,
u
press the CAM button on the CCA re-
peatedly until either the TV image or
the image of the video device is dis-
played.
Source switching with the CCU
If the TV tuner is installed in a Professional
Line system,
u
press one of the VIDEO buttons on the
CCU repeatedly until the TV or the vid-
eo image is displayed on the monitors.