Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE
y The steam option cannot be used with all cycles.
y Steam may not be clearly visible during the steam
cycles. This is normal. Too much steam could damage
clothing.
y Do not use steam with delicate fabrics such as wool,
silk, or easily discolored fabrics.
Saving energy,
COLD WASH ™
Adding the COLD WASH™ option reduces energy usage and
provides the same washing performance as a warm water
wash.
By using 6 different washing motion (Tumbling, Rolling,
Stepping, Scrubbing, Swing, Filtration), fabrics get the
cleaning benefits, without the energy usage.
B
A
1
Press
and turn
to the desired cycle.
2
Press
. The washer will automatically adjust the cycle
settings.
3
Set any other desired options.
C
4
Press
.
NOTE
y When you select the COLD WASH™ option, wash time
will be increased up to 10 minutes.
y For high wash efficiency, it is recommended to use
less than 8 pounds.
Turn on/off melody and button tones,
SIGNAL ON/OFF
The washing machine plays a melody when the wash cycle
is finished. The buttons make a sound each time a button is
pressed. The melody and button tones can be turned on and
off as desired.
To enable signal off
Press and hold
for 3 seconds during the wash
cycle.
- Once signal OFF is set, the signal beeps once.
To enable signal on
(When the-end-of-cycle signal is disabled)
Press and hold
for 3 seconds during the wash
cycle.
- Once signal ON is set, the beeper beeps once.
USING YOUR WASHING MACHINE
Setting options during cycle
You can add the desired options during the wash cycle.
Button lock feature,
You can lock the washing machine to prevent children or
others from changing the cycle settings by pressing the
buttons during the cycle.
To enable child lock
Press and hold
for 3 seconds during the wash cycle.
- When the CHILD LOCK is enabled, a N message and the
remaining wash time are displayed, in turn, on the display
panel of the washing machine.
To disable child lock
(When the CHILD LOCK is activated.)
Press and hold
for 3 seconds during the wash cycle.
NOTE
y CHILD LOCK lasts after the end of cycle. If you want to
deactivate this function, Press and hold the PREWASH
button for 3 seconds.
Detecting weight of load,
Loading the washing machine and pressing the start button
triggers the machine to detect the weight of the load, and
displays the load size icon
seconds. If the load size icon
the weight of the load again during the cycle. This feature
will help you set the detergent amount so as to wash clothes
efficiently based on the detected load size.
Press and hold
for 3 seconds during the cycle.
- The load size icon
appears on the display.
NOTE
y If the washer has detected a small load size, the display
may only show one lighted bar. Only a small amount
of detergent should be used, because the amount of
clothing and the quantity of water that will be used is
small.
y The load detection routine only works with dry clothes. Since
the detection system is detecting the WEIGHT of the load,
it will be affected by unusually heavy articles in the load. For
example, a garment that is already wet that is loaded with other
items will cause the LOAD SIZE reading to be inaccurate.
27
CHILD LOCK
LOAD SIZE
on the display panel for 10
is not on, you can check
Publicidad
