Cleaning And Maintenance; Technical Specifications - TOOLCRAFT VE89182 Manual Del Usuario

6. Operation
Insert the power plug into the mains.
Turn the thermostat knob fully to the left.
Switch on the heater by selecting the power.
When the room has reached the desired temperature, turn the thermostat knob to the left until
the heater switches off. The temperature is now set and the heater will automatically switch
on/off to keep the temperature at a constant level.
Switch off and disconnect the heater after use.
When the appliance is switched off (with supply cord in socket), the fan will keep blowing until
the appliance is cooled down.
7.

Cleaning and Maintenance

Before cleaning, switch of the appliance, disconnect from the mains and allow to cool
completely.
Never immerse the appliance in water or any other liquid. Protect it from splashes and spraying
liquid.
Occasionally wipe with a damp cloth to keep it looking new. Do not use harsh chemicals,
cleaning solvents or strong detergents.
8.

Technical Specifications

power supply ....................................................................................... 220-240 V~, 50 Hz
power consumption ................................................................................................2000 W
IP rating ................................................................................................................... IP21
air output .......................................................................................................... 120 m³/h
© COPYRIGHT NOTICE
All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced to
any electronic medium or otherwise without the prior written consent of the copyright holder.
V. 01 – 22/06/2018
VE89182
5