Operating; Mode Switching; Control Panel - Whirlpool WAP1038Q Manual De Usuario

WhftJjlool
Panel indication and operation instructions
Power On/Off
1
©)
POWER
Power-on
Plug the machine's power plug into a power socket.
• When the machine is powered up for the first time, the product will enter the idle mode after emitting a beep. None
of the indicators will be lit at this moment.

Operating

Press the power button
• Press the power button in the idle state, and all the function indicators of the product will light up.
• When the Air Quality Indicator color is cycled according to the detected air quality while the Auto Operation Mode
Indicator is Iii, the product will enter the Auto Operation Mode.
• After approximately 5 minutes, the Air Quality Indicator color will change to the color corresponding to the detected
air quality.

Mode Switching

• Operation mode can be switched between Auto, High, Mid and Low modes, while functions are enabled and the
corresponding indicators are lit.
• Running in the Auto Mode can achieve indoor air purification under general circumstances.
Shutdown
Press the power button
• The product will stop running and enter the idle state. All the indicators will turn of f .

Control Panel

Sleep Mode
Timer
4
2 8
@)
.
�
TIMER SLEEP
Child Replace Timer
Ladt
FIiter
Filter Reset
Fan Speed
AUTO HIGH MID LOW
@
@
SPEED FILTER RESET
FAN
Auto Sleep Air Quality
Child Lock
8
CHILD LOCK
23