Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Select the desired cycle
Select the desired cycle for your load. See the "Cycle Guide"
for more information about each cycle.
Auto Moisture Sensing™ cycles
You can select a different dry level, depending on your load,
by turning the knob to More, Normal, or Less.
Selecting More, Normal, or Less automatically adjusts the
dryness level at which the dryer will shut off. Once a dry level
is set, it cannot be changed without stopping the cycle.
Auto Moisture Sensing™ cycles give the best drying in the
shortest time. Drying time varies based on fabric type, load size,
and dryness setting.
NOTE: More Dry removes more load moisture. Normal Dry
is used for a starting point for Auto Moisture Sensing™ cycles.
Choose normal to save energy. Less Dry removes less moisture
and is used for loads you may want to put on a hanger to
complete drying.
4.
Set cycle options (on some models)
Select the cycle options by turning the knob to the desired
position.
NOTE: Not all options and settings are available with all cycles.
Wrinkle Guard™ option
Get up to 40 minutes of heat-free, periodic tumbling at the
n
end of a cycle. Turn the WRINKLE GUARD™ knob to select
ON or OFF at any time before the cycle has ended.
Dry Temp
Turn the DRY TEMP knob to change the drying temperature
setting. See "Setting the Drying Temperature."
8
5.
Select Cycle Signal, if desired
(on some models)
Turn the CYCLE SIGNAL knob to select the desired setting (On
or Off). The Cycle Signal produces an audible sound when the
drying cycle is finished. Promptly removing clothes at the end
of the cycle reduces wrinkling.
NOTE: When the Wrinkle Guard™ option is selected and the
Cycle Signal is on, the tone will sound every 5 minutes until the
clothes are removed, or the Wrinkle Guard™ option ends.
6.
Press and hold PUSH to START
to begin cycle
Press and hold the PUSH to START button to begin the cycle.
Promptly remove garments after cycle has completed to
reduce wrinkling. Use the Wrinkle Guard™ option to avoid
wrinkling when you are unable to remove a load from the
dryer as soon as it stops.
Publicidad
