Metronic Billy Manual Del Usuario página 10

EN
EN - BILLY JOBSITE RADIO
GETTING STARTED
• Take the appliance out of the box.
• Remove all the packaging from the product.
• Place the packaging inside the box or dispose of it safely in compliance with the
waste sorting instructions shown on the product packaging.
SAFETY WARNING AND NOTICE
You must read and understand all the instructions before using this appliance.
The warranty will not apply if damage is caused by failure to follow the instruc-
tions.
1 Never remove the appliance casing.
2 Never place this appliance on top of other electrical equipment.
3 Protect the power cord from being stepped on or pinched, particularly at the
plugs, sockets, and the point where it exits the appliance. Make sure that the
power voltage corresponds to the voltage shown on the rating plate at the rear
of the appliance. Always pull the plug from the socket when disconnecting from
the mains. Never pull on the cord. Ensure you have completed all the other
connections before connecting the plug.
4 Only use attachments/accessories that are recommended by the manufacturer.
5 Entrust all appliance repairs to qualified repairers. Repair is needed when the
appliance has been damaged in any fashion, and in particular:
• if the power cord is damaged;
• in the event of a liquid spill or objects being inserted into the appliance;
• if the appliance is exposed to rain or dampness;
• if the appliance does not operate normally;
• or if the appliance has been dropped or impacted.
6 The series panel is located on the bottom of the appliance.
7 Never block the air vents.
8 Make sure you have enough space for ventilation. Place the product on a stable
surface.
9 This device must be used in a moderate climate, away from direct sunlight,
naked flames or heat, heating devices, cookers or any other devices (including
amplifiers) that generate heat. Do not install near a heat source.
10 The batteries (battery pack or inserted batteries) must not be exposed to exce-
sive heat, such as sunshine, fire, etc.
11 Always unplug the device before cleaning it. Never lubricate any part of this
appliance. Clean it with a soft cloth. Do not use abrasive products or harsh
cleaners.
10
Hotline: hotline@metronic.com