babymoov NutriBaby Serie Manual De Uso página 17

Pre-programmed times for baby bottles
Quantity of water/milk
in the baby bottle
Time for a baby bottle
prepared with
lukewarm water
Time for a baby bottle
prepared with
cold water
C1. Connect the cooker to the blender.
C2. Remove the cooking juices receptacle.
C3. Pour 150 ml of water into the tank using the marks on the mixing bowl (level B).
C4. Remove the trays from each steam basket.
C5.Stack the trays, and place them on the base of the apparatus.
C6. Place the baby bottles upside down on the tray above the water tank. Add any accessories you also wish to sterilise.
C7. Place the lid on the cooker.
C8. Turn on using the On/Off switch on the back of the blender. The LCD screen on the front of the apparatus lights up.
C9. Press the "Mode" button one or more times to choose the desired function. Select the "sterilisation" icon
C10. Press OK to start.
C11. At the end of the cycle, an alarm will sound to inform you that the baby bottles are ready. Press OK to turn off
the alarm.
D1. Connect the cooker to the blender.
D2. Remove the cooking juices receptacle.
D3. Pour 350 ml of water into the tank using the marks on the mixing bowl (level A).
D4. Replace the cooking juices receptacle: it will collect the juices from the food, allowing you to preserve its nutritional value.
D5. Place the trays in the basket as desired.
D6. Cut the ingredients into small cubes measuring approx. 15 mm X 15 mm and place them in the cooking baskets.
- Ingredients can be separated by type (vegetables/meat), or cooking time. For example, place potatoes, which
require a relatively long cooking time in the bottom basket, and courgettes, which cook more quickly, in the upper
basket, which you will add during the cooking cycle: no more overcooked vegetables!
- Place no more than 400 g of food in each basket.
- Thanks to the removable trays, you can adjust the capacity according to need: one small basket (a), two baskets (b),
or one large basket (c) by removing the tray for the upper basket
Once the baskets are in place, place the lid on top.
D7. Turn on using the On/Off switch on the back of the blender. The LCD screen on the front of the apparatus lights up.
D8. Press the "Mode" button one or more times to choose the desired function. Select the "steam cooking" icon
D9. Select the desired cooking time using the + and - buttons. The time will depend on the type and amount of food
you wish to cook. Refer to the cooking-time table.
D10. Press OK to start cooking.
D11. At the end of the cycle, an alarm will sound to inform you that cooking is complete. Press OK to turn off the
alarm. If you wish to continue cooking, press + or – to add minutes, then press OK to start.
D12. Use the handle to remove the lid. Take care not to burn yourself.
D13. Use the handles to remove the steam baskets.
D14. You can also cook eggs. Place the eggs in the egg supports built into the trays.
90 ml 120 ml 150 ml
2 min 35 2 min 45
3 min 40 3 min 50 4 min 30 4 min 40
D. STEAM COOKING
NUTRIBABY • Instructions for use
180 ml 210 ml
3 min 3 min 3 min 10 3 min 10 3 min 10 3 min 15 3 min 25
5 min
C. STERILISING
240 ml 270 ml 300 ml
5 min 05 5 min 10 5 min 15 5 min 30
330 ml
.
.
17